6 ODROID-XU4 USER MANUALScanning ...XX:XX:XX:XX:XX:XX Rapoo E6700$ sudo bluez-simple-agent hci0 XX:XX:XX:XX:XX:XXPush the Connect button again, and enter the shown pin on thekeyboard, followed by the Enter key. If no pin is shown, try 000000.Then, type the following to trust the device and restart the bluetoothservice:$ sudo bluez-test-device trusted XX:XX:XX:XX:XX:XX yes$ sudo /etc/init.d/bluetooth restartIn Android, the Settings application may be used to connect tothe bluetooth keyboard or mouse. More details on using bluetoothwith Android are covered in Chapter 2.Ethernet and WiFiThe Ethernet port accepts a standard Ethernet cable, and is ca-pable of up to 1 GB (1000 MB) per second transmission rate. The WiFiUSB adapter fits in any of the 3 USB ports.MicroSD CardAlign the metal strips of the microSD card with the pins of the mi-croSD card connector, and slowly push it in until it clicks in place. Begentle. If you are unable to push it in, it may be misaligned. Recheckand flip the microSD card if you notice a wrong insertion direction. Theimage below shows a properly mounted microSD card.XU4 closeup with microSD card attachedChapter 1