HARDKERNEL ODROID-XU4 User Manual
Also see for ODROID-XU4: User manual
                                                                                            | |
Contents
| 
81 ODROID-XU4 USER MANUALproper isolated power supply to the display at all times, Hardkernelhas developed a micro USB-DC power bridge board. It requires itsown 5V 2A power supply with a 2.5mm plug.ODROID-VU5If you wish to use a display that consumes less power than theVU7 and VU7 Plus, Hardkernel has developed a 5” HDMI 800 x 480display kit that supports 5-point multi-touch to your XU4. It supports800x430 resolution, and offers the ability to enable or disable the back-lighting. Along with the 5” screen, the kit contains the following items:• Micro USB link board• HDMI link board• Micro-to-TypeA USB Cable• Micro-to-Micro USB Cable• TypeA-to-TypeA HDMI cable• Screws and nuts required for assemblySome of the parts are provided to interface to the XU4, whileothers, such as the link boards, are useful for the devices such as theC1+. Using Linux kernel 3.10.92-63+ or higher, while attached to an-other display or via SSH, access the Terminal and type the followingcommands:$ cd /media/boot$ nano boot.iniThen, enable the following entries in the boot.ini file:setenv videoconfig “drm_kms_helper.edid_firmware=edid/800x480.bin”setenv vout “dvi”VU5 display |
Related manuals for HARDKERNEL ODROID-XU4
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine