Hach Orbisphere 410 Basic User Manual

Also see for ORBISPHERE 410: Basic user manual Quick operator's guide User manual User manual Basic user manual

W A R N I N GPotential Electrocution Hazard. A protective earth (PE) ground connection is required for both100-240 VAC and 5 VDC wiring applications. Failure to connect a good PE ground connection canresult in shock hazards and poor performance due to electromagnetic interferences. ALWAYS connecta good PE ground to the controller terminal.C A U T I O NMultiple hazards. Only qualified personnel must conduct the tasks described in this section of thedocument.N O T I C EInstall the device in a location and position that gives easy access to the disconnect device and its operation.N O T I C EPotential Instrument Damage. Delicate internal electronic components can be damaged by static electricity,resulting in degraded performance or eventual failure.Wall mounting1. Attach the U-bracket (provided) to the wall with two screws (notprovided).2. Tilt the instrument slightly backwards to align the bracket pins andthe insertion slots, and slide the instrument onto the bracket asshown.3. Insert the 2 locking screws with washers through the side slots.4. Adjust the instrument angle for better screen vision, and lock bothside screws.Pipe mounting1. Assemble the pipe mount bracket to the U-bracket, using the two screws provided.2. Attach this assembly to the pipe using two clamps (not provided).3. Slide the instrument onto the bracket.4. Insert the 2 locking screws with washers through the side slots.5. Adjust the instrument angle for better screen vision, and lock both side screws.Panel mountingW A R N I N GElectrocution hazard. If the cable and connector for the power supply are not accessible afterinstallation, an accessible local disconnection means for the instrument power is mandatory.6 English