Hafele Cupboard Pull Out-Basket Assembly Manual

Hafele Cupboard Pull Out-Basket Assembly Manual Manual pdf 1 page image

Tools Required (Not supplied)Component partsCupboard Pull Out-Basket:Assembly guide• Make sure all the components are included beforeyou start.• The number for technical support is at the bottomOf the page.• Dont rush!• Read the instructions first.• Assemble in the stages shown.• Keep the fittings together to avoid loss.• Have fun.SW4 Allen key2 x Runners (B)2 x Supportbracket (F)16 x 4.0 x 13.0 mmPan head screw(C)28 x 3.5 x 13.0 mmCounter sunk screw(D)4 x 3.5 x 25.0 mmCounter sunk screw(E)1 x Basket (A)Digram 2300/500 mmcabinet width45038527Front edge of carcase36496816426035637940142044320Cabinet baseUsing the runner drilling pattern shown in digram 1, fixcabinet member of the runners (B) to the inside face ofthe cabinet, using 7 x 3.5 x 13.0 mm counter sunkscrews (D) per cabinet member.1 2 Fit pre made base board (not included) to drawer member ofrunners (B) using 7 x 3.5 x 13.0 mm counter sunk screws (D)per drawer member, see diagram 2.Fit drawer font (not included) to runner brackets using3 x 4.0 x 13.0 mm pan head screws (C) per bracketand adjust brackets as necessary, see diagram 3.3Diagram 1PencilBradawlSpirit LevelCross Head ScrewdriverTape measureDid you know Häfele also supply tools to the trade and industry?See www.hafele.co.uk for more information.Digram 3Size of base board =450 mm deep xinternal width - 24 mmFITT_10088Issue - 01Sales and Technical Support -Tel: 01788 542020, Fax: 01788 544440, E-Mail: info@hafele.co.uk

/ 2

Related manuals for Hafele Cupboard Pull Out-Basket