Brief operation instructionsInsert the power plug into the power line socket and insert the antenna plug into the antennasocket on the rear panel. Press down the power switch of the TV set. The red indicator lightgoes on. Follow the steps below.A Program preset1. Auto searching and storing programPress MENU or TUN to enter the Search Menu. Press Program up/down buttons to selectCOLOR SYSTEM and SOUND SYSTEM. Press VOLUME buttons to select the system.Press Program up/down buttons to select AUTO SEARCH and press VOLUME buttons tosearch automatically. When the search finishes, all the programs will be storedautomatically and the TV returns to normal status.2. Manual search and fine tunePress MENU or TUN repeatedly to enter the Search Menu. Press Program up/downbuttons to select COLOR SYSTEM and SOUND SYSTEM. Press VOLUME buttons toselect the system. Press Program up/down buttons to select FREQUENCY RANGE andPROGRAM NUMBER. Press VOLUME buttons to set and Program up/down buttons toselect MANUAL CHANNEL SEARCHING. Press VOLUME buttons to search manually.When the search finishes, all the programs will be stored automatically and the TV returnsto normal status. If the effect is not good, press Program up/down buttons to select FINETUNE and press VOLUME buttons until the optimum effect is achieved.3. Deleting channel numberPress MENU or TUN repeatedly to enter the Search Menu. Press Program up/downbuttons to select SKIP. Press VOLUME buttons until the OFF item lights. Now theprogram number is deleted. Repeat the above steps, when the item lights, the deletedprogram number can be resumed.B Volume tuningPress VOLUME buttons to increase or decrease the volume.C Personal preference setting1. Picture effectPress P.STD repeatedly to change among PERSONAL, STANDARD, DYNAMIC, SOFTand NATURAL.2. Sound effectPress S.STD repeatedly to change among PERSONAL, STANDARD, MUSIC, FILM andLANGUAGE.