3. Connect insulated 20-gauge jumper wire from the lead of the nearest component on oneside of the pattern break to the lead of the nearest component on the other side.Carefully crimp and solder the connections.CAUTION: Be sure the insulated jumper wire is dressed so that it does not touchcomponents or sharp edges.2. Technical specificationsz Power supply: AC 150V-250V, 50/60 Hzz Tuning system: voltage synthesized type auto-search fine tuning systemz IF: 38MHzz Power consumption: ≤ 140Wz Antenna input impedance: 75Ωz Receiving system:a) Color system: PAL/ NTSC3.58MHZ/4.43MHZb) Broadcast TV system: B/G,z Language displayed: Englishz Video input: 1.0VP-P (75Ω)z Video output: 1.0VP-P (75Ω)z Audio input: 436m Vrms (40KΩ)z Audio output: 436m Vrms (more than 600KΩ)