Haier 50UG6550G User Manual

Also see for 50UG6550G: User manual

Haier 50UG6550G User Manual Manual pdf 10 page image

7EnglishPREPARATIONIMPORTANT: Do not apply pressure to the screen displayarea which may compromise the integrity of the display.The manufacturer’s warranty does not cover user abuseor improper installations.ATTACHING THE STANDIMPORTANT: The stand of the TV must be assembledprior to usage.1. (blanket, foam, cloth, etc.) to prevent any damage tothe TV.PREPARING YOUR LCD TV FOR WALL MOUNTINGWe suggest that you keep your TV at least 2.36 inches(60 mm) from the wall to prevent cable interference.Before mounting your TV on the wall, you need toremove the stand.For your safety, please use only with a UL listed wallmount bracket with minimum weight of the TV withoutstand. (Please see page 18 for the weight of the TV.)To attach a wall mount bracket to your TV:1. Remove the screws holding your TV to the stand.2. Remove the stand from your TV.3. Secure the wall mount bracket to the back of your TVusing four screws (see page 18 for the size of thescrews). Follow the instructions of the user manualthat came with the wall mount bracket to install.TURNING ON THE TV1. Install the stand and place the TV on a solid surface.Ensure that the TV is placed in a position to allow freeback cover.To prevent any unsafe situations, no naked sources,such as lighted candles, should be placed on or in thevicinity.Avoid heat, direct sunlight and exposure to rain or water.The equipment shall not be exposed to dripping orsplashing.2. Connect the antenna cable or cable TV cable to theANT IN aerial socket on the back of the TV set. See"CONNECTING TO AN ANTENNA/CABLE WALL JACK"on page 9.3. Remote control:Remove the cover of the battery compartment.Insert the 2 supplied batteries (Type AAA 1.5V).4. Power:Plug the cord into a working power outlet.5. Turn the TV on:Press on the remote control or POWER button onthe side control panel of the TV.NOTEThe wall mount bracket are not included.Min1 mNOTEM4x24 mm(4pcs )2. Fix the stand to the bottom of the TV withthe four M4 X 24 mm screws.