Haier 50UG6550G User Manual
Also see for 50UG6550G: User manual
                                                                        | |
Contents
| 
11INITIAL SETUPwill guide you through setting up basic settings.1. Press to turn on the TV. The setup wizard screenopens. Press OK to start the wizard.3. Press to select your tuner type, then pressto start channel scan.Air – Set the signal type to antenna. When set toAir, the TV can receive analog and digital (ATSC)broadcasting signals.Cable – Set the signal type to cable. When set toCable, the TV can receive analog and QAMbroadcasting signals.6. The auto channel scan usually takes a few minutesto complete but can take up to 20 minutes. You cancancel the channel scan by pressing EXIT.During initial setup, press EXIT to exit the initial setup.INPUT SOURCEPress INPUT to open the input source list, then pressto highlight an input and press OK to switch.NAVIGATING THE ON-SCREEN MENU1. Press MENU button to display the main menu.2. Press button to select what you want set.3. Press OK to enter setting.Press MENU to return to the previous menu. If the mainmenu is displayed, pressing MENU will close the on-screen menu.egaugnaLputeSlaitinIp WelcomeuteSlaitinIHome modeStore Modep WelcomeuteSlaitinINOTENOTE2. Press to select Home Mode or Store Mode,then press to continue.PICTUREEnglishAirCable |
Related manuals for Haier 50UG6550G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine