Haier AD142AMBAC Instruction Manual

AUTO RUN, COOL,HEAT and DRY operationUse COOL in summer.Use HEAT in winter.Use DRY in spring,autumn and in damp climate.(1) Unit start(2) Select operation mode(3) Select temp. settingPress ON/OFF button, unit starts.Previous operation status appears on display(Not Timer setting). Power indicator lights up.Press MODE button. For each press, operation modechanges as follows:Unit will run in operation mode displayed on LCD.Stop display at your desired mode.Every time the button is pressed, temp. settingincreases 1 C.If button is kept depressed, temp.setting willincrease quickly.Every time the button is pressed, temp. settingdecreases 1 C.If button is kept depressed, temp. setting willdecrease quickly.RecommendationsHintsWire controller can memorize each operationstatus. When starting it next time, just pressON/OFF button and unit will run in previousstatus.Press FAN button. For each press, fan speed changesas follows:(4) Fan speed selectionUnit runs at the speed displayed on LCD.In HEAT mode, warm air will blow out after a shortperiod of time due to cold-draft prevention function.In DRY mode, when room temp. becomes 2 C higherthan temp. setting, unit will run intermittently at LOWspeed regardless of FAN setting.Unit will start running to reach the temp. settingon LCD.Press ON/OFF button.Only time and room temp remains on LCD.All indicators go out.Vertical flap closes automatically.(5) Unit stopPress TEMP button10AUTOLOW MID HIGHAUTOAUTO COOL DRY FANHEATAMCOPERATIONAUTOMODE FAN SWINGTEMPCLOCK SETTIMER SLEEPRESETFILTER RESETON/OFF15234SET