Haier AD142AMBAC Instruction Manual

14OPERATIONPower Failure Compensation (to be applied for a necessary situation)After the power failure compensation is set, if power failure suddenly occurs while the air conditioneris working, it will resume the previous working state when the power is supplied again.Setting Method: When the wire controller is on (excluding timer mode and fan mode), pressthe "Sleeping" button on the remote controller 10 times within 5 seconds, andafter the buzzer rings 4 times, the air conditioner will enter the state of powerfailure compensation.Cancel Method: Press the "Sleeping" button on the wire controller 10 times within 5 seconds,and after the buzzer rings 2 timer, the power failure compensation mode will becancelled.Notes: When a power failure suddenly occurs during the air conditioner is working after the powerfailure compensation is set, if the air conditioner will not be used for a long time, please cut off thepower supply to prevent its operation from being resumed after the power is supplied again, or pressthe "Switch On/Off" button after the power comes again.In this series changeover switch is set:1. ON 2.OFF 3.OFF 4.OFF