Haier AD422BMBAA Installation And Operation Manual

Contents

Timer On/Off functionOperation instructionTIMER ON TIMER OFF TIMER ON-OFFBlankSETON/OFFMODE FAN SWINGTEMPCLOCK SETTIMER SLEEPRESETFILTER RESETBefore using TIMER function, calibrate theclock first (referring to page 3). When youwake up in the morning, before going backto home after work or after going to bed, youcan let your air conditioner automatically turnon or turn off.2.Set of TIMER modePress the TIMER button to change theTIMER mode, each press the TIMER modewill change as the following sequence:1.Turn on the unitCancel TIMERPress the TIMER button several times until the TIMER mode displaydisappears.After turning on the unit, set the desiredworking mode.The LCD of the wire controller will show workingmode. (except for Timer, Sleep, Swing)* Each press, the set time increases 10 minutes. If depress the button, the time willincrease rapidly.*Each press, the set time decreases 10 minutes. If depress the button, the time willdecrease rapidly.3.Set timePress the time adjusting buttonThis LCD will show the time set, the time can be adjusted within 24h.(AM stands for morning, PM stands for afternoon).4.Confirm the timeAfter calibration of the clock, press SET button to confirm time.The time displayed is: at x oíclock x minutes the unit will be turned on(TIMER ON) or turned off (TIMER OFF).Hints:.After power failure, the clock should be calibrated again.The wire controller has memory function, when you use this function for thesecond time, if the time set is the same as the previous one, you just need tochoose the TIMER mode then press the SET button to confirm.OFFON OFFONAM PM AM PMThen choose the timer mode as you need(TIMER ON or TIMER OFF.)At this time the or will flash.ON OFF* * * *At this time, the* *or* *will not flash.ON OFF