Haier AP482AKEAA Operation And Installation Manual

Also see for AP482AKEAA: Service manual Service manual

Haier AP482AKEAA Operation And Installation Manual Manual pdf 10 page image

8(Not availble in these units)(Not availble in these units)2.Up & down air directionPress the up & down button once ,the LCD aiflow direction will display as follows:Cooling/Dehumification/airflow :The up& down flade will move according to the above conditions.Note:Pay more attention to not cut down the power supply because the flade can’t back tothe colse position at this circumstance;3.Left & right air directionPress the Left & right button once ,the LCD aiflow direction will display as follows:The left & right flade will move according to the above conditions.Note:1.During AUTO mode,pls. don’t touch the flade to avoid damaging the inner part of the unit;2.If the difference between real position & the chart position ,press ON/OFF(control panel)button or ON/OFF (remote controller ) button to close the flade and re-open the unit,then itwill be normal condition.Up and down Side from sidePosition 1Position 2Position 3Position 4Position 5Position 6Position 7Position 8[COOL/DRY/FAN/AUTO(COOL)have not](AUTO SWING)Position 1Position 2Position 3Position 4Position 5Position 6ONOFFTEMPHEALTH FANMODESLEEP SWINGCLOCKTIMERSETLOCKLIGHTRESETHEATOperation Air flow adjustmentSwing louvers (Vertical louvers) (Horizontal louvers)(AUTO SWING)Remote controller:Heating :Auto :Position 1 Position 2 Position 3 Position 4 Position 6Position 5 Position 4 Position 3 Position 2 Position 1 Position 6Position 1 Position 2 Position 3 Position 4 Position 5 Position 6Remote controller: Position 1 Position 2 Position 3 Position 4 Position 5 Position 6 Position 7 Position 8