CH+CH-VOL- VOL+MENUVHF-L 188.16 MHz CH NO:4Auto SearchTuneThe TV set has three methods to set the channels, which are Auto search, Search, Quick Search and Finetune.In this section, how to use the remote control to set the channel is explained. You can also use the buttonson the TV set to set channel.Auto search1. Press the MENU button to displaythe menu, then press CH+/-buttonsto select TUNE menu, press VOL+button to enter.2. Press the CH+/- buttons to movethe indicator to " Auto Search ".3. Press the VOL+ button, and"Auto Search" mode will work.The TV set will search automaticallyall available programs, after searchis finished, all available programswill be stored in turn.If you want to stop the search,just press the MENU button.The order of the automatic search is due to the frequency ofthe program, generally speaking, it is used only the first timeyou search the program, and after the order of the programhas been made, you don't have to use this function,otherwise the order of the program will be mixed.Auto searchAfter searching (Continued)Press the CH+/- buttons to check channels.If the colour or sound is abnormal in a certain channel, it may bebecause that the colour or sound system has not been setproperly, then, you may adjust it to proper system (Refer topage 8).ExchangeProgram editSearchAuto SearchQuick SearchMENUPictureSoundTuneSetupTimerExchangeProgram editSearchAuto SearchQuick SearchMENUPictureSoundTuneSetupTimer