CH+CH-VOL- VOL+MENUWatching TV ProgramsWatching TV programsCH+CH-VOL- VOL+MENUCH+CH-VOL- VOL+MENUHow to select the TV programSelect the desired program1. Use the direct number selection button2. Use the CH+/- buttonsPress the CH+ button to select the channel of the larger number.Press the CH- button to select the channel of the smaller number.Press the button from 0-9 to select a one-figure channel.If you want to select a double figures channel, press thefigure-selection button and change it into two-figure mode, thenpress the number of the channel.If you want to select a three figures channel, press the figure-selectionbutton and change it into three-figure mode, then press the numberof the channel.Select the desired soundPress the VOL+/- buttons to adjust the volume to your need.If the colour or sound of a certain channel isabnormalIf the TV set you bought isabnormal in colour or sound in acertain channel, it might bebecause the colour or soundsystem has been set improperly.You may follow the instructionbelow to adjust it. Press theMENU button, then press CH+/-buttons to select function menu,and you can see the form . Thenpress VOL+ button to enter sub-menu.If the colour of the picture is abnormalPress the CH+/- buttons to move the indicator to "Color Sys.", andpress the VOL+/- buttons to select the proper color.Refer the above steps to enter theProgram edit menu. Press the CH+/-buttons to move the indicator to"Sound Sys.", and press the VOL+/-buttons to select the proper sound.If the sound is abnormalProgram NO. 2Skip OffLock OffSound Sys. DKFine tune <144.20MHz>Program editLanguage EnglishScreen Saver OnCurtainColor sys. PAL50HDM scan 60PTransparency OnTilt 0MENUPictureSoundTuneSetupTimer