11OperationDRY OperationRemote controllerPress TEMP. buttonEvery time the button is pressed, temp.settingincrease 1oC,if kept depressed, it will increaserapidlyEvery time the button is pressed, temp.settingdecrease 1 oC,if kept depressed, it will decreaserapidlySelect a desired temperature.3.Select temp.settingPress FAN button. For each press, fan speed changes asfollows:Remote controller:LOW MED HI AUTO4.Fan speed selection5.Unit stopPress ON/OFF button, the unit stops.1. Unit startPress ON/OFF on the indoor unit, or press ON/OFFonthe remote controller, unit starts.2.Select operation modePress MODE button. For each press, operation modechanges as follows:Remote controller:Then Select DRY operationAUTO COOL DRY FAN HEATCOOL operation starts when roomtemp.is higher than temp.setting.On reaching temp.setting +2oCunit will run in mild DRY mode.Ultra-low air flowTemp.setting+2 oCTemp.settingAir conditioner is running under displayed fan speed.In DRY mode, when room temperature becomeslower than temp.setting+2oC,unit will run intermittentlyat LOW speed regardless of FAN setting.Previous operation status appears on LED display.