20Remote monitoringThe control board of the indoor unit reserves the communication port for remote control. Ifyou install the peripheral equipment according to the manual of the matching remote controldetector, it can realize the computer management or remote monitoring of the conditioner.Please refer to the manual of the " Conditioner remote control detector" for the detailsPower failure resume(please set and apply as necessary)With ON of remote controller (except TIMER and FAN),repeatedly press SLEEP button 10times in 5 seconds, after 4 Beep from the buzzer, the unit comes into power failure resumemode.With setting of power failure resume, if sudden power failure occurs, the unit will resumeoriginal operation when power is supplied again.Setting methodTo cancel:Note:press SLEEP button continuously 10 times in 5 seconds, the buzzer sounds Beep twice andpower failure resume function is canceled.When sudden power failure happens during unit operation in power failure resume mode,ifthe air conditioner is not desired for use in a long period, please shut off the power supplyin case that the unit automatially resume operation when power is re-supplied, or pressON/OFF to turn off the unit when power resumes.Operation hints