Haier HL24XSL2 Owner's Manual

Also see for HL19SL2: Troubleshooting guide Owner's manual Owner's manual

Haier HL24XSL2 Owner's Manual Manual pdf 14 page image

OperationEN-13 Haier LED HDTVChannel Label SetChannel IndexChannel LabelSelect BackEXITVideoAudioChannelLockFunction1CH+/-VOL+/-Then press CH+/- button to select Channel Indexand VOL+/- button to select the position of the item thatyou want to change, afterward press INPUT to input thenumbers and symbols and ENTER button to confirm.Time Shifting ModeY : To turn the Time ShiftingMode on or off.Set the Time Shifting On, then insert the USB drive inA the USB input.PressB PLAY/PAUSE to play or pause the program. Ifyou want to stop time shift function, press the STOPbutton.-00:00:011 x7:00 7:30-00:00:01 7:00 7:301.Time shift time. The time delay to the current programtime.2.Playback status: It shows the playback status (Play,Pause, Fast Forward, Rewind).4 Play Fast forwardPause Fast reverse3.Playback speed: playback speed can be changed -1x,2x,4x,8x,16x,32x.4.Playback position: The playback position is always at thecenter of the time bar.5.Time scale:shows the time in half hour increments.NoteTime Shift function is only available in DTVRmode.The maximum recording duration is determinedRby the memory size of the USB drive and the signalresolution. Please use a high-speed USB 2.0 drivewith a minimum of 1GB capacity.Time shift only supports FAT32 file-system.RTime shift supports more than 4GB recording byRusing multi-file storage.Antenna or Cable.Channel ScanY : Press VOL+/ENTER button to startto scan, press EXIT to cancel.Channel ScanStatus: Scanning... AntennaAnalog Channels: 4Digital Channels: 3CancelEXIT40%VideoAudioChannelLockFunctionAll channels now available will be automaticallypreset in order .After the search has finished, thefirst program number will display on the screen. Thissearch automatically adds only the active channels inyour area to the TV's memory. It deletes any channelson which there is no broadcast or a poor signal. Thechannels found are automatically saved.Channel SkipY :Press VOL+/ENTER button toenter the submenu, then press CH+/- buttonto select the channel number (eg.2) and pressENTER to confirm, a mark will be display in thepane as follows and this channel will be skippednext time you press CH+/- button but you can pressdigits button to select the channel. If you want toresume the channel, press ENTER button again.Channel Skip2 Analog3 Analog4 Analog5 Analog5-1 Digital6 Analog7 Analog8 Analog9 Analog10 AnalogSelect BackEXITSetVideoAudioChannelLockFunctionENTER CH+/-VOL+/-Channel LabelsY : Allows you to name thechannel that is selected. Press VOL+/ENTERbutton to enter the submenu.