3-4. Remove the Terminal BracketChapter 3. Disassemble and Assemble3-1. Remove the Stand1. Lay down the unit so that back cover facesupward2. Remove the five screws from the backcover which are indicated with the circles in thepicture above.3. Remove the stand3-2. Remove the Back Cover1. Remove the ten screws indicated (Seepicture right.)2. Then remove the back cover from theunit.3-3. Remove the Adhesive TapeThe location of the adhesive tape is shownbelow.Remove the adhesive tape.Remove the six screws indicated by the redcircles in the picture. (See next page.)Service ManualModel No.: HL42XLE211
