Haier HL32LE2 Service Manual

Also see for HL32LE2: Owner's manual Owner's manual

Haier HL32LE2 Service Manual Manual pdf 23 page image

Service ManualModel No.: HL42XLE222InstallationHaier LED HDTV EN-10Then, make the corresponding audio connectionC by connecting an audio cable from your PC's audioout or headphone jack to the TV's PC/DVI audio injack. If using a sound card, adjust the VGA sound asrequired.Back of TVPC/DVI AUDIOPCPC INHow to useTurn on the computer and the TV.AUse INPUT on the remote control to select VGA orBHDMI source.Check the image on your TV. There may be noiseCassociated with the resolution, vertical pattern,contrast or brightness in VGA mode. If noiseis present, change the VGA mode to anotherresolution, change the refresh rate to another rateor adjust the brightness and contrast on the menuuntil the picture is clear. If the refresh rate of the VGAgraphic card can not be changed, change the VGAgraphic card or consult the manufacturer of the VGAgraphic card.NoteUse a DVI cable.RAvoid keeping a fixed image on the TV’s screenRfor a long period of time. The fixed image maybecome permanently imprinted on the screen.The synchronization input form for Horizontal andRVertical frequencies is separate.ResolutionYMode ResolutionFramefrequency(Hz)VGA 640×480 60HzSVGA 800×600 60Hz75HzXGA 1024×768 60Hz75HzHDMI and DVI inputWhen the source device (DVD player , Bluray player,or Set Top Box) supports HDMIHow To ConnectConnect the source device to the HDMI port ofAthis TV with an HDMI cable (not supplied with thisproduct).No separated audio connection is necessary.BHow To UseIf the source device supports Auto HDMI function,•the output resolution of the source devicewill be automatically set to the appropriateresolution1280×720p.If the source device does not support Auto HDMI,•you need to set the output resolution appropriately.To get the best picture quality, adjust the outputresolution of the source device , if available, to1280×720p for the 32" TV and 1920 x 1080 for the37" and 42" TVs.Press the INPUT button to select the corresponding•HDMI input source.Select HDMI input source ininput source option of Select Main source menu.When the source device (DVD player , Bluray player,or Set Top Box) supports DVIHow To ConnectConnect the source device to the HDMI port of theATV with a HDMI-to-DVI cable (not supplied with thisproduct).