Haier HL42K Owner's Manual
Also see for L32K1: Owner's manualUser manualService manual
                                   | |
Contents
| 
External Equipment ConnectionsDVD SetupHow to connect1. Connect the DVD video outputs (Y, Pb/Cb,Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr)input jacks on the TV and connect the DVDaudio outputs to the AUDIO jacks on the TV,as shown in the figure.2. If your DVD only has an S-Video outputjack, connect this to the S-VIDEO inputon the TV and Connect the DVD audiooutputs to the AV IN jacks on the TV,as shown in the figure.NOTE: If your DVD player does not havecomponent video output, use S-Video.How to use1. Turn on the DVD player, insert a DVD.2. Use the TV/AV button on the remotecontrol to select S-VIDEO or YPbPr/YCbCrmode.3. Press Play button on external equipmentfor program play.4. Refer to the DVD player's manual foroperating instructions.HDMI or DVI Setup-To watch digitally broadcast programs,purchase and connect a digital set-topbox.How to connectUse the TV`s COMPONENT (Y, Pb/Cb,Pr/Cr) IN jacks, VGA or HDMI port forvideo connections, depending on yourset-top box connections available.Then, make the corresponding audioconnections.How to use1. Turn on the digital set-top box.(Refer to the owner`s manual for the digital set-top box.)2. Use TV/AV on the remote control to select PC or HDMI(Y, Pb/Cb, Pr/Cr) mode.3. Press Play button on external equipment for program play.10orDVDCOMPONENT INANT INCOMPONENT INANT IN |
Related manuals for Haier L32K1
manualsdatabase
Your AI-powered manual search engine