Haier HL42K Owner's Manual

Also see for L32K1: Owner's manual User manual Service manual

Haier HL42K Owner's Manual Manual pdf 19 page image

Picture Control FunctionsHow to customize your own picture statusHow to select picture modesYou can quickly select the desired picture mode from three preset modes and onecustomized mode.Press the P.STD button to select the desired picture quality. Four kinds of picture modes(i.e., "Standard","Bright", "Soft", "User" ) can be selected in turn.1 Press MENU button and then use VOL+/- button to selectPicture menu .2 Press CH+/- button to select the item to be adjusted, thenpress VOL+/- button to obtain the desired effect.UserSoftBrightA spare setting that can be adjusted to personal tastesDesigned for rooms that have good all round lightingDesigned for night time low light viewingDesigned for rooms with high ambient lighting such as day time sport;StandardThe TV menu gives you can an overviews of the menus you can select.Note: Depending on the input signal, one or more menu items may not beselectable.NOTEWhen Personal mode is notselected, the Personal modecan be entered automaticallyif Contrast, Brightness, Color,Tine and Sharpness parametersare adjusted.17Pic.Mode StandardContrastBrightnessTintColorSharpnessColor Temp. StandardReset505005050PictureContrastThis will adjust the intensity of bright parts in the picturebut keep the dark parts unchanged.BrightnessThis will adjust the light output of the complete picture,which will mainly affect the darker areas of the picture.Tint (selectable in NTSC mode only)Allows you to select the color mix (Tint) of the picture.ColorThis will adjust the saturation level of the colors to suit your personal preference.SharpnessThis will adjust the sharpness of fine details in the picture.Color temperatureThis will increase or decrease Warm (red) and Cool (blue) colors to suitpersonal preferences.Select Cool to give the white colors a blue tint, Standard to give the whitecolors a neutral tint, Warm to give the white colors a red tint.ResetTo recover to the default value.