Control panelRemoteControllerOperationSet clock correctly before starting TIMER operation.1. After unit starts, select your desired operation mode.Operation mode will be displayed on LCD.2. Timer mode selectionPress TIMER button to change TIMER mode. Everytime the button is pressed, display changes as follows:Remote controller:Then select your desired TIMER mode (TIMER ON orTIMER OFF). " " will flash.3. Time settingPress HOUR / button.Every time the button is pressed, time settingincreases 10min, if kept depressed, it will increasesrapidly.Every time the button is pressed, time settingdecreases 10min, if kept depressed, it will decreasesrapidlly.It can be adjusted within 24 hours.4. Time confirming for TIMER ONAfter setting correct time, press TIMER button to confirm." " on the remote controller stops flashing." " starts flashing.Time displayed: Unit starts or stops at x hour x min.5. Time setting for TIMER OFFJust press HOUR button, follow the same procedure in"Time setting for TIMER ON ".6. Time confirming for TIMER OFFAfter time setting, press SET button to confirm." " on the remote controller stops blinking.Time displayed: Unit stops at X hour X min.To cancel TIMER modeJust press TIMER button several times until TIMERmode disappears.According to the Time setting sequence of TIMER ONor TIMER OFF, either Start-Stop or Stop-Start can beachieved.TIMER On-Off Operation0/0/0/0''0''0''0/ 0''16E.HEAT