Haier HPU-18H03 Operation Manual

Contents

17.Singal sending displayWhen the remote controller appears abnormal,use a sharp pointed article to press this buttonto reset the remote controller normal.1. RESETUsed to select TIMER ON, TIMER OFF,TIMER ON-OFF.3. TIMER buttonUsed to set correct time.4. CLOCK buttonUsed to select sleep mode.24. .SLEEP button6. MODE buttonUsed to set clock and timer setting.7. HOUR buttonUsed to set healthy operation.5. HEALTH buttonUsed for unit start and stop.9. ON/OFF button10. TIMER ON display11. FAN SPEED display12. LOCK display13. SWING UP/DOWN display14. SLEEP display15. HEALTH displayUsed to select your desired temperature.16. Operation mode display18. Left/right air flow displayRemote controller: to display the TEMP. setting.19. TEMP display20. TIMER OFF display22. TEMP buttonUsed to select fan speed: LOW,MED, HI, AUTO.23. FAN button8. SWING UP/DOWN buttonUsed to select up or down air sending direction.Used to confirm timer and clock settings.25. SET buttonUsed to lock buttons and LED display. If pressed, theother buttons will be disabled and the lock conditiondisplay appears. Press it once again, lock will becanceled and lock condition display disappears.26. LOCK21. TIMER displayRemote controllerControl panel: See p17LOW HIMED AUTO192. LIGHT buttonControl the lightening and extinguishing ofthe indoor LED display board.719 15162614Operation mode AUTO FANCOOL DRYRemote controllerDisplay boardAUTO COOL DRY FANB ANOTE:(1) The following functions and related displays are not available:(2) Cooling only unit do not have functions and displays related with heating.5Parts and Functions