Haier HSU-09HVd03 Operation Manual

Contents

Haier HSU-09HVd03 Operation Manual Manual pdf 3 page image

3AUTO COOL DRY FAN HEAT2.Select operation modePress FAN button. For each press, fan speedfollows:Press MODE button. For each press, operation modechanges as follows:Remote controller:Remote controller:Press buttonEvery time the button is pressed, temp.settingincrease 1 oC,if kept depressed, it will increaserapidlyEvery time the button is pressed, temp.settingdecrease 1 o C,if kept depressed, it willdecrease rapidlySelect a desired temperature.4.Fan speed selection3.Select temp.settingAir conditioner is running under displayed fan speed.When FAN is set to AUTO, the air conditionerautomatically adjusts the fan speed according to roomtemperature.LOW MED HI AUTO1. Unit startPress ON/OFF on the remote controller, unit starts.Base OperationRemote controllerchanges as32:(562)7)5(6+Emergency Operation:temperature is below 16 oC, do not use it in theTest operation:Use this switch in the test operation when the roomnormal operation.your finger from the switch: the coolingContinue to press the test operationswitch for more than 5 seconds . Afteryou hear the "Pi" sound twice, releaseTest ope ration switch is the same as emergency switch.operation starts with the air flow speed "Hi".Emergency operation and test operationUse this operation only when the remote controlleris defective or lost.When the emergency operation switch ispressed,the" Pi "sound is heard once, whichthe start of this operation.meansUnit won't restart until 3 minutes have elapsed, due toHEAT mode is not available oncooling only unit.It is advisable not to keep vertical flap at downward positionor DRY mode, otherwise,water might occur.Cautions:When humidity is high, condensate water might occur atlouvers are adjusted to left or right.for a long time in COOLair outlet if all horizontalsystem protection.condensateIn this operation, the system automatically selectsthe operation modes, cooling or heating, accordingto the room temperature.It is not possible to operate in dry mode.Temperature OperationmodeDesignatedtemperatureTimermode Air flowABOVE 23O CBELOW 23 OCCOOLINGHEATING 23 OC26 OC NONOAUTOMATICAUTOMATICAfter 30 minutes, test operation ends automatically.Vertical flapPos.1 Pos.2 Pos.3Pos.4 Pos.5 Pos.6 (Auto swing)1.Status display of air sending2.Left and right air flow adjustment(manual)Pos.1 Pos.2 Pos.3 Pos.4Pos.5 Pos.6 Pos.7 Pos.8For each press of button, remote controllerdisplays as follows :remote controller:OperationModeAUTORemoteController NoteCOOLDRYHEATFANIn DRY mode , when room temperature becomeslower than temp.setting+2 o C, unit will runintermittently at LOW speed regardless of FANUnder the mode of auto operation, air conditionerwill automatically select Cool or Heat operationaccording to room temperature.to AUTO, the air conditioner automatically adjuststemperature.When FAN is setthe fan speed according to roomIn FAN operation mode , the unit will not operate inCOOL or HEAT mode but only in FAN mode ,AUTO is not available in FAN mode. And temp.setting is disabled. In FAN mode, sleep operationsetting.is not available.Air Flow Direction AdjustmOperation