Maintenance6Setting of proper roomtemperatureClose doors and windowsduring operationIf the unit is not to be usedfor a long time, turn off thepower supply main switch.Use the timer effectivelyUse the louvers effectivelyDo not block the air inletor outletPropertemperatureDuring cooling operationprevent the penetrationof direct sunlight withcurtain or blindOFFRemote Controller Indoor BodyFor Smart Use of The Air ConditionerReplacement of Air Purifying FilterDo not use water,wipe the controllerwith a dry cloth.Do not use glasscleaner or chemical cloth.wipe the air conditioner by using asoft and dry cloth.For serious stains,use a neutral detergent diluted withwater.Wring the water out of thecloth before wiping,then wipe off thedetergent completely.Air Filter cleaningOpen the inlet grille by pulling it upward.Remove the filter.Clean the filter.Attach the filter.Close the inlet grille.Push up the filter's center tab slightly until it isfrom the stopper, and remove the filter downward.Use a vacuum cleaner to remove dust, or wash the filter withwater.After washing, dry the filter completely in the shade.Attach the filter correctly so that the "FRONT" indicationfacing to the front.Make sure that the filter isfixed behind the stopper.If the rightattached correctly, thatDo not use the following for cleaningGasoline,benzine, thinner or cleanseray damage the coating of the unit. Hot water over 40 OC(104OF) maydiscoloring or deformation.Once everytwo weeksm causereleasediscompletelyand left filters are notmay cause defects.1.Open the lnlet Grille2.Detach the standard air filter3.Attach Air Purifying Filter4.Attach the standard air filter(Necessary installation)5.Close the Inlet GrilleClose the Grille surelySlide the knob slightly upward torelease the filter, then withdraw it.Detach old Air Purifying FilterProp up the inlet grille by using asmall device named grille-supportwhich located in the right side ofthe indoor unit.The green aspect of the bacteria-killing medium air purifying filter willface outside, the white aspect will face to the machine.Note: the bacteria-killing mediums placed on the left side.The multi-lights touching intermediary is placed on the right side.Common sense:1.For the units with UV light degerming function, the air purifying filterof the bacteria-killing medium and the multi-lights touching intermediaryis effective for a long time and don’t need to be changed(UV lightthe nano TiO 2 on the multi-lights touching intermediary, and the2.For the units without UV light degerming function, the air purifyingdegerming effect is highly efficient and lasting.Multi-lights touchingfilter of the multi-lights touching intermediary will be solarized in fixedtime. In normal family, it will be solarized every 6 months. The3.But in the use, please note to clean the filter frequently( take off thelowered due to the dust covering the filter. Multi-lights touchingintermediary and bacteria-killing medium filter is strictly prohibited fromThe bacteria-killing medium filter not in use should be stored in shade,cool and dry place.Please don’t expose it to the sunlight for a long timePut air purifying filter appliances into theright and left filter frames.emitted by the UV light device of the indoor unit catalytically activatesintermediary don’t need to be exposed to be sunlight).solarization time will last no less than 8 hours under the state ofabundant sun.back suction cleaner or lightly pat it) to avoid the operating effect isbeing cleaned by water.otherwise the degerming performance will drop.