Haier HSU-18H03/R - annexe 1 Operation Manual

Also see for HSU-18H03-R: Installation manual

Contents

Haier HSU-18H03/R - annexe 1 Operation Manual Manual pdf 16 page image

Operation Sleep OperationRemote ControllerDisplay boardPOWER/SOFTFRESHPURIFYPower Failure Resume FunctionIf the unit is started for the first time, the compressor willnot start running unless 3 minutes have elapsed.Whenthe power resumes after power failure, the unit will runautomatically, and 3 minutes later the compressor startsrunning3. In AUTO modeThe unit operates in corresponding sleep modeadapted to the automatically selected operation mode.4. In FAN modeIt has no SLEEP function.5.6.Note to the power failure resume:press the sleep button ten times in five secondsand enter this function after hearing four sounds.And press the sleep button ten times within fiveseconds and leave this function after hearingtwo sounds.Before going to bed, you can simply press theSLEEP button and unit will operate in SLEEPmode and bring you a sound sleep.Use of SLEEP functionAfter the unit starts, set the operation status,then press SLEEP button before which theclock must be adjusted and time being set.OperationOperation Mode1. In COOL,DRY mode1 hours after SLEEP mode starts, temp. willbecome 1OC higher than temp. setting. Afteranother 1 hours, temp. rises by 1OC further.The unit will run for further 6 hours then stops.Temp. is higher than temp. setting so that roomtemperature won't be too Iow for your sleep.SLEEP operation starts SLEEP operation stopsApprox.6hrs1 hr Rises 1 OCRises 1 OCTemp.setting Unit stopIn COOL, DRY mode1 hrSLEEPoperation startsSLEEPoperation stops1 hr1 hr3 hrs3 hrsRises 1OCTemp.setting Unit stopIn HEAT modeDecreases 2O CDecreases 2O C2. In HEAT mode1 hours after SLEEP mode starts, temp will become2 OC lower than temp. setting. After another 1 hours,tempdecrease by 2 O C further. After more another 3hours, temp. rises by 1OC further. The unit will runfor further 3 hours then stops. Temp. is lower thantemp. setting so that room temperature won't be toohigh for your sleep.15With the power failure resume, if setting the TIMER ON,TIMER OFF and TIMER ON/OFF,the unit is off whenresuming after power out.NOTE:When TIMER function is set, the sleeping functioncan't be set up .After the sleeping function is set up,if user resets TIMER function, the sleeping functionwill be cancelled; the machine will be in the state oftiming-on.