Haier HSU18VCK Service Manual

Also see for HSU18VCK: Installation manual Service manual

HSU18VCK-SMOperation1.After unit starts, select your desired operation mode.2.Press TIMER button to change TIMER mode. Everytime the button is pressed, display changes as follows:Remote controller:Then select your desired TIMER mode (TIMER ON orTIMER OFF or TIMER ON-OFF). " "or " "will flash.Timer On/Off On-Off Operation Healthy airflow Operation1.Press to startingSetting the comfort work conditions.2.The setting of healthy airflow functionNote:1.After setting the healthy airflow function, the positiongrill is fixed.3.In cooling and dry, using the air conditioner for a longtime under the high air humidity, condensate water mayoccur at the grille .Notice: Do not direct the flap by hand. Otherwise, thegrille will run incorrectly. If the grille is not run correctly, stopfor a minute and then start, adjusting by remotecontroller.2.In cooling, it is better to select the mode.BLANKTIMER ON TIMER OFF TIMER ON-OFF3.Press / button to set time.It can be adjusted within 24 hours.Hints:After replacing batteries or a power failure happens, timesetting should be reset.According to the Time setting sequence of TIMER ON orTIMER OFF, either Start-Stop or Stop-Start can be achieved.3.The cancel of the healthy airflow functionTIMER OFF-ON0.5h 0.5h 0.5h 0.5hPress the button for each time, setting time in the first12 hours increased by 0.5 hour every time, after 12hours,increased by 1 hour every time.Press the button for each time, settiing time in the first12 hours decreased by 0.5 hour every time, after 12hours,decreased by 1 hour every time.After adjust the time,press button and confirm thetime ON or OFF button will not flash any more.4.Confirm timer setting5.Cancel timer settingPress the timer button by times until the time displayeliminated.Press button to enter additional options,Press thisbutton continuously, the louvers location will cycle betweenin the following three locations, to choose the swing locationwhat you needed,and then press button to confirm.Press button to enter additional options,Press thisbutton continuously, the louvers location will cycle betweenin the following three locations again,and then pressbutton to cancel.HealthyairflowupwarderHealthyairflowdownwarderPresentposition25