Haier HW-07LF03 Operation Manual

Also see for HW-07CK03: Operation manual

Contents

Haier HW-07LF03 Operation Manual Manual pdf 12 page image

Installation Guide121. Make the wall hole or window hole (see Fig.1).2. Fix the prefabricated iron frame to stableposition by expansible screws.3.Take out the conditioner and accessoriesfrom the package .4.5. If you need to lead the condensed water toindicated position, please purchase a pieceof plastic pipe , set it on the outlet pipe fittingand tie it tightly.6. After installation of all the accessories, putthe whole machine on the iron frame. Ifthere's water outlet flexible pipe, lead thepipe to needed position(see Fig.4).7. Fill any distance between the wall hole andthe machine body with flexible sponge rubberstrip to prevent the entering of outer noise andthe leaking of the coolness.8. After installation of the conditioner, insert thepower plug into the outlet and perform test-run.Cooling-only type air-conditioner: before dispatchedfrom the factory, the drip hole at the bottom platehas been blocked by rubber lid in the accessories.If the surrounding humidity is high, should assembledrainage bend in the drainage hole at the back ofbottom plate and connect the drainage tube asillustrated in Fig. 3. If the user doesn't need toretain the condensate in the bottom plate, canremove the rubber lid on the bottom and asillustrated in Fig. 2, assemble the attached drainpan on the bottom of the air-conditioner, and connectdrainage tube at the water outlet hole on the drainpan.Installation of air-conditioner (only for reference)Fig. 2Fig.3Fig.4Fig. 1350450Width of the wallIron frameWallWater outlet flexiblepipe(provide by user)Outlet pipe fittingCondenserWater outlet flexiblepipe(provide by user)Drain pan ScrewRubber lidCondenser

/ 12

Related manuals for Haier HW-07CK03