10Backboard singal source interfacesThere are a lot of signal sources that can be connected to your TV set. Thefollowing diagram shows how to connect them.Friendly tips:If you want to hang the TV set on a wall, all connecting lines must be insertedinto the ports of the TV set in advance.Whenever a peripheral equipment is connected to the TV set, be sure the TVset is powered off.While connecting peripheral equipment, connect the cable to the terminal withthe same color as its own.HDMI 2COMPONENTHDMI 1AUDIOINPC INY Pb Pr L LAV OUTVIDEOVIDEOAV IN 1LRRRTVANTENNAAntenna input:Insert the antenna terminal into the TV set's antenna socket. This socket is a75Ω coaxial cable input.AV IN 1 input:Connect the VIDEO outputs of DVD player, LCD player, video recorder orvideo camera, etc. to the VIDEO input of the TV set.Audio input: Connect the audio signal source (PC, DVD player, LCD player,video recorder or video camera, etc.) to the audio input port.AV output :This interface can be used to output the TV signal of the unit to another TVset.Component input:Connect the audio / video of the component signal source (PC, DVD player,LCD player, video recorder or video camera, etc.) to the component signalinput port.PC signal and PC audio input:Connect the PC signal line to the PC and the PC interface of the TV set.Connect the audio line to the PC audio input interface of a PC or a TV set.HDMI:It refers to "high definitiion multimedia interface". It connects the HDMI signalconnecting line to DVD player, etc.