12Preset and watch TVThe following is how to use the On/Off key ( ) on the TV remote control to turn on/off the TV set. (Press the key Channel +/- in standby mode may power on the unit,its the same for the side panel and the remote control.Power On/Off1. While switching on the AC power supply, the red indicator lamp stands for standbymode, while no indicator lamp stands for power on and switch off.2. If the TV set is in standby mode, press the On/Off key on the remote control topower on.3. Pressing on the On/Off key on the remote control may enter standby mode again.4. If you don't use the TV set for a long period, unplug the power cord of the TV setfrom the socket to save electric energy, because the TV set consumes electricityeven in standby mode.Selecting input signal for TV programIf the TV set is not in the TV mode, the following methods may be used to select TVprogram:1. Press source key on the remotecontrol to pop out signal source menuon the TV screen (as shown in the rightdiagram).Press the / key and SOURCE key toselect the option TV, and then press >key or OK key to confirm switching to TVinput terminal. After such switching, thesignal source selection menu disappears,and the information on the current signalsource is displayed on the up right cornerof the screen. If no other operationsare made, the signal source menu willdisappear in nearly 5 seconds.2. Pressing the CHΛ/V key or number key may also return toTV mode.How to select TV programSelecting TV program1. Selecting with number key directly• Press the number key directly to select the desired numberof channel.2. Selecting with the CHΛ/V key• Press CHΛ key to select the channel number in theincreasing direction.• Press CHV key to select the channel number in thedecreasing direction.Selecting TV volumePress the VOL+/- key to adjust to the desired volume.?SCANFREEZE P.MODE S.MODE ARCH.LOCKSOURCEOKDISPLAYUSB BACKRECREV FWD PREV NEXTTEXT MIX SUBCODE HOLDPIP SWAP MOVE ZOOMTIMESHIFT PLAY/PAUSE HELPINDEXSLEEP FAVORITEHDMIⅠ/Ⅱ