Press ''MENU'' key on the remote control or on the controlpanel. The TV will display the main menu.1. Press ''Left/Right'' key on the remote control or ''VOL+/VOL-''key on the control panel to select the adjustmentsort menu, which includes 4 sorts:2. Press ''Down''key on the remote control or ''CH-'' on thecontrol panel to enter the adjustment sort menu.3. Press ''Up/Down'' key on the remote control or ''CH+/CH-''on the control panel to select what is needed to adjust insort menu.4. Press ''Left/Right'' key on the remote control or ''VOL+/VOL-''on the control panel to adjust thevalue or setting.5. Press ''Menu'' key to exit the main menu when the TV displays the Main Menu; Press ''Menu''key to return to previous menu when the TV displays the submenu; Press ''SOURCE'' key todisplay the signal source menu or exit signal source menu.6. During the operation, the selections which can not be adjusted at current mode will be hiddenautomatically and the color of the selections will be changed into gray.7. Menu Operation Instruction in this manual is explained according to TV mode. The operations inother modes are similar to the one in TV mode. Users can take it as reference.Select to enter the PICTURE submenu. Press "Up/Down" key on the remote control or "CH+/CH-"key on the control panel to choose what you need. Press the "Left/Right" key on the remote controlor the "VOL+/VOL-" key on the control panel to adjust analog value or state (see below table).★Special Attention1. The Hue function is available only for NTSC system.PICTURE, SOUND,OSD, TV.2. The value adjusted by user, such as Contrast, Brightness, Hue, Saturation, and Sharpness willbe saved automatically by the machine as User mode.★Remote Control Shortcut KeysSMART P: Press SMART P key on the remote control. You can switch the function among the"Standard", "Soft", "User", "Bright" four modes .16:9: Press 16:9 key on the remote control, you can switch the mode among the "Full, "4:3","Subtitle","Film" four modes.Adjust Select Menu:ExitFullStandard4848505550Picture ModeContrastBrightnessSaturationSharpnessAspect RatioColor Temp.Noise ReductionHueSoftOffBasic Operation InstructionPicture ModeContrastBrightnessSaturationHueSharpnessSelect picture modeAdjust the contrast of wholepictureAdjust brightness and blacknessof whole pictureAdjust the saturation of wholepictureAdjust the hue of whole pictureAdjust the sharpness of wholepicture"Standard", "Soft", "User," "Bright" four modes.Increasing analog value increases Contrast;Decreasing analog value decreases Contrast(0-100).Increasing analog value increases brightness;Decreasing analog value decreases brightness(0-100).Increasing analog value increases color;Decreasing analog value decreases color (0-100).Increasing analog value increases green;Decreasing analog value increases purple(0-100).Increasing analog value increases definition;Decreasing analog value decreases definition (0-100).Option Function DescriptionPICTUREMenu Operation Instruction9