Introduction4. Remote Control Installing Batteries1. Open the battery compartment cover on the back of the remote control.2. Insert two 1.5V AAA size batteries observing the polarity markings inside the batterycompartment. Don’t mix diStep 1 Step 2 Step 3fferent types or used batteries with new ones.3. Close the cover.- The remote control should be operated within 30 feet (7m) and 300 to the left and right of theIR receiver at the front of the TV.- Used batteries should be disposed of properly.HTR-D06ABatteryCompartmentCoverHTR-D06A2 x AAA BatteryHTR-D06A9Base Stand Assembly Instructions Note: the pictures below are only for referenceThe parts needed for installing the stand (supplied: Part1, Part2, Part3, Part4, Part5, Part6, Part7)Setps:234 671. Put the part2 to the part1, andfix them with the screwssupplied as the picture showns.2. Put the part3 and part4 to thepart 2.3. Put the part6 an part7 to thepart5.4. Put the part5 (including part6and part7) to the part2(including part3 and part4).5. Fixing the part2, part 3, part 4part5, part6, part7 with thescrews supplied as the pictureshowns.Screws:4xB4x163 456 7Screws:6xB4x12Step 1 Step 2Step 3Step 4Step 51Batteries shall not be exposed to excessive heat such as direct sunlight or fire.