Basic OperationBasic OperationPower on/off1. Connect the TV to a wall outlet using the included AC power cord.2.-To turn on the TVPress the POWER button on the TV or remote control.-To turn off the TVPress the POWER button on the TV or remote control.Input Source selectPress the INPUT button on the remote control to displaythe input source menu, and use the Ĥ / ĥthe remote control to select the input source. Press the ENTERbutton on the remote control to switch to the selected input.Note: Before you select the input source, make sure theconnections are properly connected.14TVAVComponentHDMI1HDMI2HDMI3VGAUSBINPUT SOURCEbuttons onBasic OSD Menu operationMain menuPicture, Audio, Time, Setup, Lock, ChannelSubmenu(Picture menu shown as an example)ButtonsUse the buttons listed here to navigate theOSD menu.Press the MENU button to display the OSD menu as shown below:Use the =!/ ? buttons to select the main menu, and press the ĥ!button to enter the submenu.In the submenu, use the Ĥ / ĥ buttons to select the function item.Adjust ("Contrast" shown in above example with the=!/ ? buttons;Select ("Picture Mode" as shown in above example ) with the =!/ ? buttons;Enter the submenu ("Close Caption" item in Setup menu for example) with ?!button.* (Press the MENU button to return to the upper menu.)* (Press the EXIT button to exit the menu display.)Note1: Some options can only be accessed in certain modes.MEMC Normal