Haier LEF65V200S Operating Instructions Manual

Haier LEF65V200S Operating Instructions Manual Manual pdf 46 page image

English - 42 -If the selected network is protected with a password,please enter the correct key by using the virtualkeyboard. You can use this keyboard via thenavigation buttons and the OK button on the remotecontrol.Wait until the IP address is shown on the screen.This means that the connection is now established. Todisconnect from a wireless network, highlight NetworkType and press OK.You can navigate between menu tabs by pressingleft/right buttons. The help bar on the bottom of thedialog shows features that you may use. Press theBlue button to check your internet connection speed.Press the Green button to switch to advanced modeand then press the OK button to edit settings.Other InformationConfiguration Status: Displays Wi-Fi status asConnected or Not Connected.IP Address: Displays the current IP address.Network Name: Connected networks’ name will bedisplayed.Delete Saved Wi-Fi ProfilesSaved profiles will be deleted if you press the Redbutton while the wireless device selection OSD ison the screen.Connecting to your mobile device via WiFi• If your mobile device has WiFi feature, you canconnect it to your TV via a router, in order to accessthe content in your device. For this, your mobiledevice must have an appropriate sharing software.• Connect to your router following the steps statedabove in the Wireless Connectivity section.• Afterwards, engage your mobile device with therouter and then activate the sharing software onyour mobile device. Then, select files that you wantto share with your TV.• If the connection is established correctly, you willbe able to access the shared files from your mobiledevice via the Media Browser of your TV.• Enter the Media Browser menu and the playbackdevice selection OSD will be displayed. Select yourmobile device and press the OK button to continue.• If available, you can download a virtual remotecontroller application from the server of your mobiledevice application provider.Note: This feature may not be supported on all mobiledevices.WIRELESS DISPLAYWireless Display is a standard for streaming video andsound content by Wi-Fi Alliance. This feature providesthe ability to use your TV as wireless display device.Using with mobile devicesThere are different standards which enable sharing ofscreens including graphical, video and audio contentbetween your mobile device and TV.Plug the wireless USB dongle to TV first, if the TVdoesn’t have internal WiFi feature.Then press the Source button on the remote andswitch to Wireless Display source.A screen appears stating that the TV is ready for connection.Open the sharing application on your mobile device.These applications are named differently for eachbrand, please refer to the instruction manual of yourmobile device for detailed information.Scan for devices. After you select your TV andconnect, the screen of your device will be displayedon your TV.Note: This feature can be used only if the mobile devicesupports this feature. Scanning and connecting processesdiffer according to the programme you use. Android basedmobile devices should have the software version V4.1.2and above.Bluetooth ConnectivityYour TV supports Bluetooth technology. A pairingis required before using the Bluetooth devices withthe TV set. You should do the followings to pair yourdevice with the TV:*Set the device to pairing mode*Start device discovery on the TVNote: Refer to the user manual of the Bluetooth device tolearn how to set the device to pairing mode.You can connect audio devices or remote controllersvia Bluetooth to your TV. For audio devices you shoulduse the Audio Link option in the System>Soundmenu, for remote controllers the Smart Remoteoption in the System>Settings>More menu. Selectthe menu option and press the OK button to openthe related menu. Using this menu you can discoverand connect the devices that use Bluetooth wirelesstechnology and start to use them. Follow the on-screen instructions. Start the device discovery. A listof available bluetooth devices will be displayed. Selectthe device you want to connect from the list and pressthe OK button to connect. If “Device connected”message is displayed, the connection is successfullyestablished. If the connection fails try it again.Note: Bluetooth and Wireless LAN devices operate withinthe same radio frequency range and may interfere with oneanother. To improve the performance of your Bluetooth deviceplace it at least 1 meter away from any other Bluetooth orWireless LAN devices.