Haier LEF65V200S Operating Instructions Manual

Haier LEF65V200S Operating Instructions Manual Manual pdf 47 page image

English - 43 -Connectivity TroubleshootingWireless Network Not Available• Ensure that any firewalls of your network allow theTV wireless connection.• Try searching for wireless networks again, using theNetwork Settings menu screen.If the wireless network does not function properly, tryusing the wired network in your home. Refer to the“Wired Connectivity” section for more information onthe process.If the TV does not function using the wired connection,check the modem (router). If the router does nothave a problem, check the internet connection ofyour modem.Connection is SlowSee the instruction book of your wireless modem to getinformation on the internal service area, connectionspeed, signal quality and other settings. You need tohave a high speed connection for your modem.Distruption during playback or slowreactionsYou could try the following in such a case:Keep at least three meters distance from microwaveovens, mobile telephones, bluetooth devices or anyother Wi-Fi compatible devices. Try changing theactive channel on the WLAN router.Using DLNA Network ServiceDLNA (Digital Living Network Alliance) is a standardthat eases the viewing process of digital electronicsand makes them more convenient to use on a homenetwork. For further information, visit www.dlna.org.The DLNA standard allows you to view and playphotos, music and videos stored in the DLNA mediaserver connected to your home network.1. Nero Media Home InstallationThe DLNA function cannot be used if the serverprogramme is not installed onto your PC. Pleaseprepare your PC with the Nero Media Homeprogramme. For more information about theinstallation, please refer to the “Nero Media HomeInstallation” section.2. Connect to a Wired or Wireless NetworkSee the chapter Network Settings for detailedconfiguration information.3. Play Shared Files via Media BrowserSelect Media Browser by using the Left or Rightbuttons from the main menu and press OK. The Mediabrowser will then be displayed.DLNADLNA support is only available in the Media Browserfolder mode. To enable folder mode, go to theSettings tab in the main media browser screen andpress OK. In the settings options, highlight View Styleand change to Folder using the Left or Right buttons.Select the desired media type and press OK.If sharing configurations are set properly, DeviceSelection screen will be displayed after selecting thedesired media type. Select the desired one and pressOK to display the content of the selected network orUSB memory. If you want to refresh the device list,press the Green button. You can press Menu to exit.If available networks are found, they will be listed onthis screen. Select media server or network that youwant to connect to using the Up or Down buttonsand press OK.If you select the media type as Videos and choose adevice from the selection menu, a new menu screenwill appear on the screen.Select Videos from this screen again to list all theavailable video files from the selected network.To play other media types from this screen, you mustgo back to main Media Browser screen and select themedia type as desired and then perform the networkselection again. Refer to the Media Browser Menusection for further information on file playback.Subtitle files do not work if you watch videos from yournetwork through DLNA.You can connect only one television with DLNA tothe same network. If a problem occurs with the DLNAnetwork, please switch your television off at the wallsocket and back on again. Trick mode and jump arenot supported with the DLNA function.Note: There may be some PC’s which may not be ableto utilize the DLNA function due to administrator andsecurity settings (such as business PC’s).For best home network streaming with this TV, theNero software should be installed.