Haier P37K1 Owner's Manual
                                      | |
Contents
| 
External Equipment ConnectionsNOTE: All cables shown are not included with the TV.Choose Your ConnectionThere are several ways to connect your television, depending on the components youwant to connect and the quality of the signal you want to achieve. The following areexamples of some ways to connect your TV.Choose the connection which is best for you.VCR ConnectionConnection Option 1Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number.Connection Option 21. Connect the audio and video cables from the VCR's output jacks to the TV input jacks, asshown in the figure. When connecting the TV to VCR, match the jack colors (Video = yellow,Audio Left = white, and Audio Right = red).If you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality isimproved; compared to connecting a regular VCR to the Video input.2. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner`smanual.)3. Select the input source with using the INPUT button on the remote control, and then pressCH+/- button to select the source, press the VOL+ button to confirm.- To avoid picture noise (interference), leave an adequate distance between the VCR and TV.9S-VEDIOVEDIO L RAV INAV OUTANT.Y Pb/Cb Pr/Cr AUDIOL RCOMPONENT INPCAUDIO INPC INHDMI |
Related manuals for Haier P37K1
manualsdatabase
Your AI-powered manual search engine