Haier P37K1 Owner's Manual

Haier P37K1 Owner's Manual Manual pdf 15 page image

External Equipment ConnectionsPC SetupHow to connect1. Use the TV`s VGA IN port for video connections.2. Then, make the corresponding audioconnection. If using a sound card, adjust thePC sound as required.How to use1. Turn on the PC and the TV.2. Turn on the display by pressing the POWERbutton on the TV's remote control.3. Use TV/AV on the remote control to selectVGA source.4. Check the image on your TV. There may benoise associated with the resolution, verticalpattern, contrast or brightness in PC mode.If noise is present, change the PC mode toanother resolution, change the refresh rate toanother rate or adjust the brightness andcontrast on the menu until the picture is clear.If the refresh rate of the PC graphic card cannot be changed, change the PC graphic cardor consult the manufacturer of the PC graphiccard.NOTES:1 Avoid keeping a fixed image on the TV's screen for a long period of Time. The fixed imagemay become permanently imprinted on the screen.2 The synchronization input form for Horizontal and Vertical frequencies is separate.3 To obtain the best picture, do not play the USB, YPbPr, HDMI or VGA source at the sametime.The TV has a special signal output capability which allowsyou to hook up a second TV or monitor.Connect the second TV or monitor to the TV`s AV OUT.See the Operating Manual of the second TV or monitor forfurther details regarding that device`s input settings.Notes:YPbPr, VGA, HDMI, S-Video input sources cannot beused for Monitor out.When connecting with external audio equipments, suchas amplifers or speakers, please turn the TV speakers off.Monitor Out Setup11S-VEDIOVEDIO L RAV INAV OUTANT.Y Pb/Cb Pr/Cr AUDIOL RCOMPONENT INPCAUDIO INPC INHDMIS-VEDIOVEDIO L RAV INAV OUTY Pb/Cb Pr/Cr AUDIOL RCOMPONENT IN