Haier P60A11-AK Owner's Manual

Watching TV ProgramYou can watch TV program in a presetting channel.How to select the desired program1 Using "Program number" buttons.Directly enter the channel number with the numeric keypad on the remote control.If to select channel numbers of double-digit or three-figure ,press continuously thenumeric buttons in three second.2 Using CH+/- button.Press the CH+ button to select a channel number in number increasing direction.Press the CH- button to select a channel number in number decreasing direction.How to select the desired soundPress VOL+/- button on the remote or the front of theTV set to adjust the volume level. The range is 0~100.When the volume button are pressed the volume level isdisplayed automatically on the TV screen.VolumeTo select the TV modeBefore watching TV program, you may ensure your TV in TV mode.Press TV/AV button to select TV mode.18Quick program view1 Suppose the channel number you used just now is 8 and the channelnumber you are using is 18 (as shown in the figure).If you want to return to the last watched program channel 8, you cansimply press the Q.View button.If you want to return to channel 18, press the button again. Use thisfunction, you can easily change between the channel you are using andthe channel you used last Timer.23This function enables quick swap to the last watched program.Shuttle functionPress SHUTTLE button about 3 second, and the display Channel Storedon the screen, at the time, you may operate other, then if you scan overprogram, you may press again shuttle button to return to the settingprogram.Shuttle function enables quick swap to setting program.Channel Stored