Haier QHV05LX Installation And User Manual

Also see for QHV05LX: Installation and user manual

Contents

WARNINGElectrical Shock HazardPlug into a grounded 3 prong outlet.Do not remove the ground prong from the power cordplug.Do not use an adapter.Do not use an extension cord.Ïäìïøõè÷òçòöòæäñõèöøï÷ìñçèä÷ëĤõèòõèïèæ÷õìæäïshock.ELECTRICAL REQUIREMENTSINSTALLATION REQUIREMENTSBEFORE YOU BEGIN4Read these instructions completely and carefully.• IMPORTANT – Save these instructionsfor local inspector’s use.• IMPORTANT – Observe all governingcodes and ordinances.• Note to Installer – Be sure to leave theseinstructions with the Consumer.• Note to Consumer – Keep these instructions forfuture reference.• Skill level – Installation of this appliance requiresbasic mechanical skills.• Completion time – Approximately 1 hour• We recommend that two people installthis product.• Proper installation is the responsibilityof the installer.• Product failure due to improper installation is notcovered under the Warranty.• You MUST use all supplied parts and use properinstallation procedures as described in theseinstructions when installing this air conditioner.These models require a 115/120-volt AC, 60-Hzgrounded outlet protected with a 15-amptime-delay fuse or circuit breaker.The 3-prong grounding plug minimizes the possibility ofelectric shock hazard. If the wall outlet you plan to use isonly a 2-prong outlet, it is your responsibility to have itreplaced with a properly grounded 3-prong wall outlet.CAUTIONDo not, under any circumstances, cut or remove the third(ground) prong from the power cord.Do not change the plug on the power cord of this airconditioner.Aluminum house wiring may present special problems—consult a qualified electrician.Power cord includes a current interrupter device. A testand reset button is provided on the plug case. The deviceshould be tested on a periodic basis by first pressing theÝÎÜÝbutton and then the ÛÎÜÎÝbutton while pluggedinto the outlet. If the ÝÎÜÝbutton does not trip or if theRESETåø÷÷òñúìïïñò÷ö÷äüèñêäêèççìöæòñ÷ìñøèøöèòé÷ëèair conditioner and contact a qualified service technician.If this power supply cord is damaged, it cannot berepaired. It must be replaced with a cord from the productmanufacturer. If the power supply cord is damaged call HaierCustomer Service: 1-877-337-3639.