Haier TFT-LCD TELEVISION L32K3 User Manual

Also see for L32K3: Owner's manual User manual User manual Owner's manual Owner's manual

Haier TFT-LCD TELEVISION L32K3 User Manual Manual pdf 13 page image

Basic Receiving and Playing OperationsTFT -LCD television Owner’s Manual 13help you with the TV operation.Switching ON/OFF the TV setFirst, connect power cord correctly and the powerA indicator will light.PressB POWER on the remote control again.If you want to exchange to standing by status,C please press down POWER on the remote controlDisconnect the power supply or unplug theD television if it is intended to completely cease thetelevision performance.Choose the Menu LanguageWhen you satisfied with your set for the first time,you must select the language which will be used fordisplaying menus and indications.PressA MENU and 3/to select Function menu.PressB 5/6button to select Function menu.Select a particular language by pressingC3/repeatedly.When you satisfied with your choice, pressD MENU toreturn to normal viewing.Language EnglishMenu Timeout 15sPicture OptimizeSound Tuning AdjustBackgroundBlack StretchPIPononChoose the Input sourceIf the TV is not in TV mode, press SOURCE on the remotecontrol unit, and signal source menu will be displayedon the TV screen (as shown in the below figure). Press5/6 to select the TV option, and press OK to confirmthe switching to TV input terminal. After switching, thesignal source menu disappears, and at the upper rightcorner of screen displays the information of currentsignal source.Pressing this key repeatedly can exit from the signalsource menu.In case of no other operation, the signal source menuwill automatically disappear upon reaching the OSDdisappearance time preset in the main menu.Component1Component2USBPCHDMI1HDMI2HDMI3/ :Move OK/ :OKSearching ChannelIn this section, how to use the remote control to setchannel is explained. You can also use buttons on the TVset to set channel.Channel EditPressA MENU on the remote control unit or MENUon the TV’s front panel to display main menu,and then press 3/ to select Tuning menu.Channel EditAuto SearchProg. ExchangeTuningSoundPressB 5/6 to select the Channel Editoption, and then press OK to enter submenu.