Hakko Electronics FM-203 Instruction Manual

Contents

Hakko Electronics FM-203 Instruction Manual Manual pdf 13 page image

686. PARAMETER SETTINGS1 Turn the power on while pressing thebutton.The station enters the parameter entrymode.2 Select the parameter number.is initially displayed, and the tens digitbegins to fl ash. Use the and buttonsto change the parameter setting, or press thebutton to select the units digit.Enter the parameter number and press thebutton to go to the next step.3Select the number for setting theparameter setting set in the precedingstep.The current setting is initially displayed.Use the , , or button to enter theparameter setting.Press the button in steps 2 or 3 toreturn to step 2 .4The display changes to , andthe station asks whether to exit theparameter entry mode.Select and press the button toexit the parameter entry mode.After the necessary parameters are set, pressand hold the button in steps 2 or 3above for two seconds.● Parameter entry mode processSelect the parameter entry mode using thefollowing operation.Be sure to insert the control card before opening.● : Temperature display (ºCor ºF)T h e H A K K O F M - 2 0 3 h a s t h e f o l l o w i n gparameters.Number LED display Setting Default settingTemperaturedisplay or : ºF display: ºC display ºC displayAuto sleeptime setting Tens digit entry Sleep time Dch: 6 min.Sch: 6 min.Low temperatureerror setting Hundreds digit entry Low temperaturethreshold entry 150ºCCustom inputsetting or :Off: On Off ( )Buzzer setting(C-E sound, S-Esound) or :Off: On On ( )Buzzer setting(Set temperaturealert) or :Off: On On ( )Auto sleepon/off setting or :Off: On On ( )Auto shutoffon/off setting or :Off: On Off ( )Auto channelswitchingon/offsetting or :Off: On On ( )Dual channelcontrol setting or :Off: On On ( )NOTE:Auto sleep can be set separately for channels D and S.NOTE:• Each time the or button is pressed, thedisplay toggles between the following displays:and .• When is selected, the parameter numberselection screen in step 2 is displayed.● When the display changes to and, the station enters the mode forchanging the temperature display.● Press the or button to switch thedisplay alternately between (Fahrenheit)and (Celsius).CAUTIONDo not leave the HAKKO FM-203 for a long time with theauto shutoff function activated. Turn the power off whenyou do not use the HAKKO FM-203 for a long time.日本文中文 English