55InstallationWLAN Router 300gDisposal of the packagingThe packaging protects the device from transport damage. The pack-aging materials have been selected according to environmental andwaste disposal aspects and can therefore be recycled.Returning the packaging to the material cycle saves raw materi-als and reduces the amount of waste generated. When no longerrequired, dispose of the packaging materials in accordance with thelocal regulations.NOTEIf possible, keep the original packaging during the warranty pe-►riod in order to be able to pack the device properly in the eventof a warranty claim.Installing the WLAN antennaeProceed as follows to install the WLAN antennae:Screw the screw connectors of the WLAN antennae onto theantenna terminals on the rear side of the device.NOTEDo not tilt the WLAN antenna when fitting it to the screw►connection. The thread could be damaged.The WLAN antenna is completely screwed-in after 4 com-►plete turns.Push the WLAN antennae 90° to an upright position and align byturning them clockwise.Preconditions for operationThe following preconditions must be satisfied for installation andoperation of the device:The TCP/IP protocol must be installed on all PCs.■The web browser must support JavaScript (e.g. Mozilla Firefox or■Microsoft Internet Explorer).An Internet account with an Internet service provider and a DSL■connection are necessary for Internet access.All devices employed must comply with the standards IEEE■802.11g, IEEE 802.11b or the draft IEEE 802.11n.
