68Configuration and operationWLAN Router 300gWireless LAN settingsThe settings for the wireless LAN are made here. To change thestandard WLAN settings, proceed as follows:On the home page, click the button "General Setup" and thenselect "Wireless" in the menu on the left.Check "Enable".Click "Apply" and in the next window click "Continue".Basic settingsSelect "Basic settings" in the menu on the left.Under "Mode", select the function the device is to perform in thenetwork.Mode CommentsAPIf the device is the only access point in yournetwork, or no connection is to be made toother access points at bridge level.AP bridgepoint to pointIf you wish to make a wireless connectionbetween this access point and a secondaccess point. In this mode, clients do nothave the possibility to log in via a wirelessconnection.AP bridgepoint to multi-pointIf you wish to make a wireless connectionbetween this access point and several otheraccess points. In this mode, clients do nothave the possibility to log in via a wirelessconnection.AP bridge WDSIf you wish to make a wireless connectionbetween this access point and one or moreother access points and clients are to con-tinue to have the possibility of wireless login.The further configuration is dependent on the selected mode.
