11Contents1. USB Multifunction Server wiring 122. Control Center installation 123. Network configuration 124. Control Center 134.1 Basic configuration 144.1.1 General configuration 144.1.2 TCP/IP 144.1.3 Supported protocols 144.1.4 User accounts 154.1.5 Maintenance 154.1.6 E-mail 164.1.7 SNMP 165. Printer server (printer connection) 165.1 Direct connection 165.2 Network printers 166. Network scanners 177. Addition of USB storage media 17to the network7.1 Direct connection 177.2 Network access 187.2.1 Quick access 187.2.2 Installation of the SMB share on a PC 187.2.3 FTP access 188. Support und contact 19Package contents:1 x Hama USB Multifunction Server1 x 12 V power supply unit1 x Printed operating instructionsSafety notes:Do not use the device in moist or extremely dusty areas,on radiators or near heat sources. This device is notdesigned for use outdoors. Protect the device frompressure and impact. The device may not be opened ormoved during operation.Caution: Use the device with the enclosed power supplyunit only. The use of other power supply units can causedamage to the device.Introduction:The USB Multifunction Server allows you to make USBdevices such as printers, scanners or hard disksaccessible on a network. In other words, every user onthe network can access this device.It is also possible to connect a USB hub to the USB port,however, keep in mind that only one device of each type(printer/hard disk) can be managed. You should notconnect more than a total of two devices to the server.Abbreviations in the text:Hama USB Multifunction Server = MFSHama USB Multifunction Server Control Center = ControlCenter1. ConnectionPower supply connection Reset to defaultsettings (see 4.1.5)Connection to USB device Connection toe.g. printer/scanner/HDD networke.g. router/switch/hubg Operating InstructionComputerNotebookMFPrinterPrinterScannerUSB-StorageMFSSwitchRouterAcesspointUSB HubComputerUSB Storage