Hama 62713 Operating Instruction
Also see for 62713: Operating instruction
           | |
17Windows VistaChoose Start => Control Panel => Printer => Add aprinter. On the following screen, select Add a localprinter. On the next screen, choose Create a newport and then Standard TCP/IP Port under Type ofport. Then click Next. In the following window, enterthe IP address of the MFS under Hostname or IPaddress. (To find this, switch to the Control Center.The IP address (such as 192.168.1.100) is displayed inthe main window after the MFS name.)Then click Next.Under Device Type, select Custom and then clickSettings. In the new window, choose LPR. Under LPRSettings, enter USB1_LQ in the field Queue Name.Click OK and then click Next. Installation of theprinter port is now complete. You must then selectthe printer driver. Select the driver (which hasalready been installed) for the connected printerfrom the list and follow the instructions provided bythe wizard.Once the installation has been completedsuccessfully, you will fi nd the printer installed in thePrinters and Faxes window. This installation of theprinter is complete.6. Network scannersIf you have already used the scanner on yourcomputer, the driver is already installed and you cancontinue with the next point. Otherwise, first installthe scanner driver on each computer that is to usethis scanner. Use the instructions and driver CDfrom the scanner manufacturer. Depending on themanufacturer, you may need to connect the scannerto the computer directly. After you have completedthe installation of the driver, reconnect the scannerto the MFS.Select the scanner or multifunction device in theControl Center and then click Network scanner.Select the driver from the list and click OK. If youare informed that no driver is installed, you must firstinstall the scanner driver from the manufacturer.The integrated tool now opens. You can select theFile name, File format and Save location here. Afteryou have made the selection, click Scan. Dependingon the driver used, the manufacturer’s scannertool will open and guide you through the scanningprocess. A preview is shown and the file is saved tothe specified folder.7. Addition of USB storage media to the networkThis device allows you to make data such as videos,music, or pictures that are saved to a USB storagemedium available to the entire network.First, connect the USB data medium to the USB porton the MFS and turn it on. There are two options foraccessing the data medium.A) Direct connection: NetUSB mode must beactivatedB) Network access: Server mode must be activatedPlease make the appropriate setting under Configureserver/Supported protocols.7.1 Direct connectionIn this mode, Windows will act the same as it wouldif the hard disk were connected via USB to yourcomputer directly. The disadvantage is that onlyone computer can access the connected device ata time. |
Related manuals for Hama 62713
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine