Hama IR200 User Manual

Contents

53StartupIR200gStartupInsert the battery into the remote controlNOTE► The battery supplied was inserted into the remote control at thefactory► Remove the plastic film from the battery compartment beforeusing for the first time.To insert a new battery, proceed as follows: Pull the battery compartment out of the remote control Remove the used battery and replace with a CR2025 lithium cellMake sure that the battery is inserted according to polarity (thepositive end pointing to the back of the remote control) Push the battery compartment back into the remote controlNOTE► Change the battery if the range of the remote control decreasesor if the device no longer reacts to all commandsSwitching the device ON and OFFSwitching onAfter connecting to the mains supply, switch on the device using theON/OFF switch (6) on the back of the device (ON)Switching offMove the ON/OFF switch (6) on the back of the device to the OFFpositionNOTE► Pressing the Standby button (1) on the remote control switchesthe device to standby mode► Pull the mains adapter out of the mains socket so that no elec-tricity is consumed00053196man.indb 53 23.07.13 12:48