Hama Wireless LAN Router 300 Mbps Operating Instructions Manual

Contents

Hama Wireless LAN Router 300 Mbps Operating Instructions Manual Manual pdf 6 page image

73.2.1.1 Operation as an Access Point (AP)Selecting this under Band allows you to specifywhether the device runs on the 2.4 Ghz band inaccordance with the 802.11b (11Mbps), 802.11g(54Mbps) standards or works in combination with802.11b and 802.11g. Then set the ESSID. TheESSID can contain up to 32 characters and mustbe identical for all devices in the network. Chan-nel Number allows you to select the channel inwhich the data is to be transfered. 13 channelsare available.Example of an ESSID : “WLAN_Router_54Mbps”Click Apply to save your settings!To set the encryption for your wireless network,click Continue in the next window and thenSecurity Settings in the menu on the left.Continue reading on page 09 for instructionson setting Wireless LAN encryption.Click Apply in the next window if you want to operate a wireless network without encryption. The router is then restarted. Thewireless network is available after you restart.3.2.1.2 Operation as an AP Bridge Point to PointSelecting this under Band allows you to specifywhether the device runs ion the 2.4 Ghz band inaccordance with the 802.11b (11Mbps), 802.11g(54Mbps) standards or works in combination with802.11b and 802.11g. Channel Number allows youto select the channel in which the data is to betransferred. 13 channels are available. Enter theaddress of the access point to which the bridgeconnection is to be made in MAC address 1. To setthe encryption for your wireless network, click theSet Security button.Continue reading on page 11 for instructions onsetting Wireless LAN encryption.Click Apply in the next window, and again in thewindow after that if you want to operate a wirelessnetwork without encryption. The router is thenrestarted. The wireless network is available afteryou restart.