Hameg HM1008-2 Manual
                                               | |
Contents
| 
25Subject to change without noticeG e n e r a l i n f o r m a t i o n c o n c e r n i n g M E N UHM2008 - HINT - Stand: 10/10/06 gwHM2008 - DKL - Stand: 10/10/06 gwHM2008 - TXT blau - Stand: 06/11/06 gwHM 2008 - TXT grün - Stand: 06/11/06 gwHM2008 - TXT SW - Stand: 06/11/06 gwC O M B I S C O P EUSBStickCOMP.TESTERPROBEADJCH I MENUAC/DC/50 ΩGND50 Ω / 1 MΩINVERTON / OFFVARIABLEON / OFFPROBE1 : 1 / 10 / 100CH I: 500 mVPOWERPOWERMENUMENUOFFOFFPushbuttonMenu Title6 Function Pushbuttons (blue)MenuIntensity Knop SymbolArrow KeysIndicator for SubmenuState indication by intensifieddisplayMENU OFF (pushbutton)On OffGeneral information concerning MENUMenu and HELP displaysIn most cases a menu is displayed after pressing a pushbutton.It contains several menu items assigned to the blue functionpushbuttons. Pressing a function button switches over, on oroff.Exiting a menu:1st Automatically after a user defined time (SETTINGS 10 push-button > , Misc > Menu OFF > time in seconds) elapsed.2nd By pressing the MENU OFF 43 pushbutton.3th Pressing the SETTINGS 10 pushbutton to switch back in themenu hierarchy.4th Pressing another pushbutton.With some menu items a rotary knob symbol is displayedpertaining to the INTENS knob 2 which then can be used tochange settings. Also arrows may be shown which point toavailable submenus.In some modes various pushbuttons or INTENS operations aremeaningless and will hence not cause a menu display.STOPPlease note:If a menu is shown some other information dis-played in the readout may disappear, this will re-appear immediately upon leaving the menu.Each menu is assisted by HELP texts, which can be called bypressing the HELP 12 and which will be also displayed by thereadout. If HELP was called and the INTENS knob 2 moved anexplanation of the actual INTENS knob 2 function will be given.HELP will be left by pressing the pushbutton again.STOPPlease note:During the display of help texts and menus in fullsize no signal display is possible.RemarksIn operation all relevant measuring parameters will be shownin the readout, provided the readout was activated and its in-tensity is sufficient.The front panel LEDs add to the operating comfort and givemore information. In the end positions of the control knob anacoustical signal will sound.Apart from the POWER 1 pushbutton, all control elementsare scanned and stored. This allows you to control the instru-ment from stored information. Some controls and menus areonly operative in digital mode or change their meaning in thismode. Explanations are given with the warning: ”Only in digitalmode.“Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176FAX 781.665.0780 - TestEquipmentDepot.com |
Related manuals for Hameg HM1008-2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine