Hamilton Beach 67950C User Manual

Contents

13TroubleshootingPROBLEM PROBABLE CAUSE/SOLUTIONMotor appears to stallwhen juicing.• The juicing action may be too vigorous. Try slower juicing action by pushing the food pusher down moreslowly. Refer to page 6, Step 3 or press REVERSE button to dislodge food.Excess pulp building upin the micro-meshstrainer.• Juicer never taken apart and cleaned.• Too much food juiced before cleaning with brush.• Unplug. Remove strainer and clean mesh walls with a fine brush. This will remove excess fiber buildupwhich could be inhibiting the juice flow.Pulp is too wet andinsufficient juice isproduced.• Try a slower juicing action.• Unplug. Remove strainer and clean mesh walls with a fine brush. This will remove excess fiber buildupwhich could be inhibiting the juice flow.Juice sprays out of spout. • Try a slower juicing action by pushing the food pusher down more slowly. Refer to page 6, Step 3.Juice drips out of spoutimmediately after juicing.• With motor ON, raise and lower food pusher in feed chute several times. The action forces remaining pulpand juice out of the strainer.Food won’t move in foodchute.• Food is stuck in the juicer chute. Press REVERSE button to allow food to move in juicer chute.Juicer will not work. • Juicer has been operating for 30 minutes or more. Press ON button to reset and begin juicing.840243102 ENv01.indd 13840243102 ENv01.indd 13 11/18/14 4:36 PM11/18/14 4:36 PM