Handy Tech Braille Wave User Manual
Also see for Braille Wave: User manualUser manualUser manual
                                                                                                             | |
Contents
| 
Braille WaveOperation of the Braille SystemHandyTechElektronikGmbHPage 45 [chord 368] activates the forward search direction which will be indicated by a high-pitched tone.In order to have an indication which search direction is activated, this option allows you toset an indicator signal. Using a radio button, one of the following three settings can beactivated:“No indication”: No indicator tone will appear when entering Braille dot combinations“Latin mode”: When entering Braille dot combination at active forwards searchdirection, a deep indicator tone appears.“nOn latin mode”: Entering Braille dot combination at active backwards search direction,a high-pitched signal tone will appear.We recommend you to preset the search direction for the characters you normally use. Forexample for entering Arabic text it is better to activate backwards search direction. For theIndicator tone we recommend to select Latin mode. When entering Latin characters inArabic text, a signal tone will appear. If you use a Braille table from Handy Tech, thesearch direction is automatically in the right way.5.1.8.13 Printer (P)To ensure correct printing, you must make various settings in the following sub-menus:5.1.8.13.1 Model (M)Here, you must select the type of printer which is connected to your Braille System. Thedefault setting is the standard printer. All printer types supported by the system are listedin the file "PRINTERS.HSF", which also contains the printer-specific control codes andother information. Printers which are capable of printing combinations of Braille dots areidentified by "(T)" for "transparent mode" after their names. The BTEC 100 is such aprinter.Since some printers can be switched between 6 and 8 dots only by means of the software,6-dot and 8-dot versions of these printers exist and are identified by the digit 6 or 8 aftertheir names. The 6-dot version of the BTEC 100 is thus shown as "BTEC 100 6 (T)".Select the desired printer type with [SPC+1] and [SPC+4] or Cursor up and down. [ESC]cancels the selection operation. [Enter] confirms the selected printer type and saves yourselection.If the printer you use does not appear in the selection list, please consult your Handy Techdealer.The standard printer supports the software protocol (Xon / Xoff).5.1.8.13.2 Characters/line (C)Here, you can set the number of printable characters per line. The default setting is 29characters, and you can set any value in the range 10 – 80 characters per line. This allowsyou to match the formatting of your texts to the existing printer settings.5.1.8.13.3 Lines/page (L)This sets the number of printable lines per page. The default setting is 30 lines and youcan set any value in the range10 - 70 lines per page. |
Related manuals for Handy Tech Braille Wave
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine